Mac Os X For Intel Nuc
I am running 10.9.2 with this unit i have bios in version 0.48. I also put the voltage up to 1.5 on the ram, USB ports randomly stop working I hear a weird sound and the computer freezes, I can see that the computer is not frozen only the usb/mouse keyboard are not. On February 28, a Mac mini featuring an Intel Core Duo processor was unveiled. On April 5, the dual-boot software Boot Camp was released as a trial version, which allowed Intel-based Mac owners to run Mac OS X and Microsoft Windows. On April 24, a MacBook Pro replacement for.
As many of you know by now, contrary to my recent article ‘Heading Over to the Dark Side‘ about moving away from Apples iPhone operating system and experiencing Android in any great anger, I am still a big fan of Apple’s products, including their very expensive Mac Pro starting at an eye-watering at $A3,999.00 and heading on up to their heart stopping $A5,299.00 for their 6-core system.
As much as I would like one of those, even their base Mac Mini at a little more reasonable $A749.00 is a little too expensive for me at the moment.
If you are familiar with this blog you will have read my tutorial ‘A Mac Pro at Quarter of the Price‘ where I go through selecting the correct hardware (similar to what Apple uses in their systems) to build yourself a powerful Mac Pro for a quarter of the price of buying a genuine Mac from them.
When I moved to Australia earlier in the year, it was simply impracticable for me to pack up my prized computer and ship it over, and now I have gotten somewhat settled in to my new life Down Under. I am desperate to be using a proper computer again, and not relying on my MacBook Air to do all my work (as great as it is).
I should point out, this time around this article is not intended to be a step-by-step guide to getting Apple’s OS X Mavericks to run on non-Apple hardware, there is some fantastic guides available to follow, I will put links to the best ones at the end of this article.
I had looked at the possibility of building a computer again, but this time I have decided to go small, really small. Computer hardware, specifically the motherboards are getting closer and closer to the hardware used in Apple systems. The most important of these is the graphics card. I am no hard-core gamer so I don’t really need high-end graphics and unlike my previous build, the Intel HD 4000 series graphics cards are really great for my needs and what’s even better is that they are compatible with Mac OS X.
This time I have chosen the Intel NUC (Next Unit of Computing) Kit DC3217IYE system from Intel.
Here is some of it’s specs:
|Features and Configurations|
|Processor||Intel® Core™ i3 processor (soldered down)|
|Memory||Dual channel DDR3 1333/1600 MHz, 2x SODIMM slots, 16 GB maximum|
|Chipset||Intel® QS77 Express Chipset|
|Display||Dual HDMI* ports supporting HDMI 1.4a output|
|Audio||Intel® High Definition Audio (Intel® HD Audio)|
|Peripheral interfaces||Five USB 2.0 ports (3 external ports, 2 via internal header)|
|Expansion capabilities||2x mini-PCIe* slots (1x half-length + 1x full/half-length)|
|Included in the box||Fan heat sink|
It certainly not as powerful as my last computer, moving to an Intel Core i3 Processor that unfortunately cannot be upgraded is certainly not the fastest at only 1.8GHz, but is suitable for what I need it to do.
Plus with a maximum of 16Gig of RAM is a little limiting, but couple this with a fast Solid-State Hard Drive the computer should be really quick. Ever since I got my MacBook Air with an SSD, I said to myself if I ever build a computer again the first thing I am putting in there is an SSD for the Operating System to run from.
These little boxes are a feat of engineering, measuring only 4″ x 4″. Not a lot of room for expandability but an amazing footprint to say the least.
Since I built my last computer in 2011, the process of getting Mac OS X on to a computer that has not been built by Apple has got even simpler, smoother and less of a headache.
I got the Intel NUC Kit home, installed the SSD, Memory, and Wifi/Bluetooth card inside, plugged in the power, inserted the bootable USB drive you make in the tutorial and wait for OS X to install as if it was a Mac. It was not that simple last time, thanks to Tony over at TonyMacX86 and the community.
- Amazingly small footprint.
- Reasonable cost, despite the requirement to purchase additional hardware.
- Ideal hardware to install Mac OS X.
- The purchased kit is bare-bones and will require you to purchase an SSD Hard Drive, Memory and the Optional Wifi/Bluetooth Card to get it up and running.
- If you intend to use this as your main computer, you are going to need to factor in the purchase of one possibly two HDMI to DVI Cables if you are planning on a two monitor setup like me.
- As a result of using both of the HDMI Sockets you have no sound output. You can remedy this by purchasing a USB Sound Card compatible with OS X, or get a USB Bluetooth Dongle if you have a Bluetooth speaker.
- Also as a result of adding in all of this – in my current set up, I have a USB Keyboard, Mouse and a Bluetooth Dongle – All of my USB ports have been used up.
- As much as I like Intel hardware, I can’t listen to the Intel Theme Tune every time I open the box or when the computer starts, thankfully that can be switched off.
- You don’t get a power cable.
You would have thought, with that many cons against it, it would not be worth it, but when you think about the cost of the computer, and the resulting set up, then I think it is going to be worth it. I have yet to live with it for a while (which I will post about my experience in the coming weeks) to see if it has been worth the extra cost.
One point that I will make is that, during my implementation stage I found that if I ran the MultiBeast options afterwards it seemed to disable the On-Board Graphics and I would be restricted to 1024×768 Resolution (not good). This may not happen to you, but if you find no matter what you try, you cannot get a higher resolution for the monitor you’ve bought then try running the system without MultiBeast and manually seek out the .kext files for the other system hardware like the Wifi Card.
Final Setup (planned):
(All prices are in Australian Dollars, and will vary dependent on where you buy.)
$369.00 – Intel NUC Kit DC3217IYE – Intel® Core™ i3
$100.00 – 1 x 8 Gigabytes of RAM Corsair
$145.00 – 128 Solid-State Hard Drive
$ 40.00 – Wifi / Bluetooth Card*
$178.00 – 2 x 21.5″ LG E2211T-BN E11 Series LCD Monitors$ 90.00 – 1 x 22″ DELL P2210F Widescreen LCD Monitor
$ 30.00 – 2 x HDMI to DVI Monitor Cables
$ 15.00 – Basic Keyboard and Mouse
$ 20.00 – 16 Gigabyte USB Stick (Not needed if you have one)
A system total of $809.00 (£439.12 at 0.54279 Exchange Rate)
*Be warned the Intel Centrino 2200 series dual cards do not work with OS X. I have had to resort to a Wifi Card in the computer and a Bluetooth USB Dongle.
My plan was to get two 22″ Monitors, but had some problems securing them. I order two, turned out they were put on the website by mistake, ordered a second lot, those too were wrongly advertised…
Found another company and order another two, they were delivered only one did not work and they were out of stock. If I am going to have two monitors, I would prefer them to be the same make and model to reduce the possibility of quality between them. The Dell P2210 Monitors are professional grade monitors, so now I have to go on the hunt for a second one, but get great resolution from the one I do have.
So I bet you’re wondering if I have spent $809.00 on building this system instead of just getting a Mac Mini when their hardware works with OS X, is able to take a larger hard drive, and their hardware is higher than this one, well lets take a look:
Base Model Mac Mini:
2.5GHz dual-core Intel Core i5
500GB hard drive
Intel HD Graphics 4000
OS X Mavericks
Granted, the processor is faster, it has a much larger hard drive. However, it has half the memory, I would not need 500Gig because much of my Software, Photographs, Television Programs and Movies are stored on External Hard Drives.
The cost, if we take into account the two 21.5″ monitors I plan on using, which cost $180.00 this brings the cost of the Mac Mini to $929.00 ($72.00 more). There is likely to be additional costs involved because it is not easy to add additional monitors without additional cables, so this is likely to increase.
Okay, I have read through your set up, and been out and bought the Intel NUC Kit and all of the extras, and I want to set up OS X 10.9 Mavericks on to it.
Head on over to TonyMacX86 and follow the instructions for installing OS X 10.9 – You will need a couple of more things before you start:
1. A Download of OS X Mavericks from the Mac App Store
2. A Free Registration to the TonyMacX86 Community
You will need to download UniBeast and MultiBeast from the site, and for that you need to register, it is easy and it’s free. Plus if you get stuck there is a forum you can ask questions or search for answers.
The instructions in the Step-by-Step guide is fantastic and really easy to follow, it will help if you are aware of the hardware you have installed in the computer to install the correct drivers at the end of the process. But it should be really easy and smooth and before long you will be enjoying a fresh install of OS X which can be updated and used as if it was a real Mac.
If you do have any questions, please feel free to ask in the comment section below, but everything you need to know about troubleshooting your installation can be found over at TonyMacX86.
Posted in Monday, 20 April 2020.
In this blog post, I’m going to talk a little about my experience running multiple operating systems with an Intel NUC I recently bought and the ESXi 7 hypervisor. My main idea was to use this homelab for:
Network Area Storage (NAS)
Stage and development machine for Go projects
I thought I’d get a full-size ATX tower case with plenty of space for expansion and components, but I was always open to any form factor. When browsing r/homelab and asking for opinions from people elsewhere, I noticed Intel’s Next Unit of Computing (also known as Intel NUC) line of barebone computers stood out as a popular choice, and I decided to give it a chance.
If you want to buy the same thing
INTEL® NUC 10 Performance Kit — NUC10I7FNH (Buy from Amazon)
Samsung 970 EVO Plus NVMe M.2 500GB (Buy from Amazon)
Crucial 32GB Kit (2 x 16GB) DDR4 2666MHz SODIMM (Buy from Amazon)
LaCie d2 Professional 8TB (Buy from Amazon)
Disclaimer: As an Amazon Associate I earn from qualifying purchases.
The best thing about this kit is the small factor. Unfortunately, it comes with a low-end GPU — otherwise, I’d use it to run the X-Plane 11 flight simulator too. I wished they made a model that supported ECC memory for reliability too…
Next Unit of Computing (or NUC) is an Intel line of small-factor barebone computers.
I’m going to use the LaCie d2 Professional external drive with FreeNAS, mostly to store my Lightroom library files.
In an ideal scenario, I’d be using at least an SSD, maybe with RAID 0. However, this would be too expensive, and this is a great alternative.
The Intel NUC has a 2.5-inch hard-drive bay unused by now, but I should eventually add an extra SSD there — perhaps, a small and fast SSD dedicated to Lightroom previews and video editing.
At this time, I’m using Backblaze for backups, but for this setup, I’ll be moving off the cloud as this will be way cheaper (break-even is months), and I’ll be under the control of my data.
Hypervisor and operating systems
I decided to use VMware ESXi, a type-1 or native hypervisor, to be able to run multiple operating systems on my new Intel NUC. ESXi is free for personal use, and you can download it from VMware’s website after registering for an account and getting a trial license.
If you plug a display on your machine, all you’ll see is the ESXi Direct Console User Interface.
ESXi is a host for virtual machines, instead of an operating system for you to use directly. The only time you need to use a display on your NUC is when configuring it for the first time or if you can’t access the web interface for some reason.
Note: while you can passthrough your video card control to your guest operating system, you can’t passthrough your mouse and keyboard. If you want your virtual machine to control them, you’ll have to passthrough an entire USB controller. Unfortunately, you won’t find a slot for an extra PCI USB controller in such a small computer.
You can control a few essential settings and do some troubleshooting from the DCUI, if necessary.
You also have access to a shell that resembles a regular Unix system, but it isn’t one. It’s not a Unix-like system, and is only partially POSIX compliant.
Shell access is seldom required, and using it to manage your system is frowned upon. You want to keep SSH disabled.
VMware ESXi 7 web client showing a virtual machine console running Plan 9 from Bell Labs
You should download the hypervisor and run on your server on a dedicated storage unit that can be something as simple as a USB pen-drive. You cannot install it on a device along with any other operating system. It’s going to partition the disk destructively. The installation process is pretty-straightforward if everything works fine.
Using HTTPS certificates
Replace the built-in certificate with one of your own.
I used Filippo Valsorda’s mkcert program to generate a HTTPS certificate to use on the hypervisor and on my FreeNAS instance.
For me, it doesn’t matter if we are talking about servers on the local network. If you are using it seriously, you should consider doing the same regardless if you’re going to be accessing it from inside your own home or not. Don’t trust your network.
Please notice I use a .dev TLD here, and modern browsers force .dev domains to use HTTPS — what is interesting because it will mitigate some security risks by avoiding sending data over plain HTTP.
Back to Intel NUC 10
VMware doesn’t list the Intel NUC line on its compatibility guide. However, many people have a positive experience running ESXi with it. I was confident everything would work out of the box, and only during installation, I discovered the Ethernet NIC wasn’t working. This hardware was released in Q4/2019 and used a new network card.
I lost some time trying to solve this issue, and here is how I fixed it:
Use a second (maybe virtual?) machine with Internet connection working fine to install ESXi on your boot device.
Open a shell or an SSH connection and execute the commands below.
Move the boot device to your Intel NUC 10th generation.
Thanks to William Lam and Andrew Roderos for the articles and help figuring out what was going on.
You can run esxcli with the –dry-run flag to see what changes it’ll make on your system. Be aware that the drivers versioning is a little confusing.
Perhaps this one would work out of the box? Unfortunately, I lost mine.
While I was at it, I bought an Ethernet dongle. It didn’t work out of the box either, and I had to install the NIC Fling.
To manage the network with it, you need some initialization scripts changes. See USB Network Native Driver for ESXi for details.
An exciting surprise is that by using two NICs, I’ve now, out of the box, fail-over. You can check your virtual switch settings for more options and play with active/standby possibilities.
$ esxcli network list
More Ethernet issues
I’m using my cablemodem Ethernet ports to connect everything. I experienced the following problems so far:
Sometimes I’m getting only 100Mbps when using my cablemodem’s CAT5e cable (on any interface).
The cheap Ethernet dongle works on my server and my Macbook. However, if I use the dongle on my Macbook, the NUC becomes unreachable.
Once, the server was unreachable when using both NICs. I removed the USB NIC from the server, immediately everything worked (through the internal NIC).
I also had some issues reserving IP addresses on my cablemodem admin page, so I suspect the routing problem might be on the modem. I don’t have a way to test for it, though.
I don’t know when I’ll be getting a new Ethernet dongle later for my laptop, though, because my 5GHz Wi-Fi connection is good enough so far. If I get it at all will be to avoid losing packets and for lower jitter and latency (for better NAS experience).
Running virtual machines
You can create or register a VM on the web client or with the vCenter server, but I haven’t tried it.
If you are running only a single ESXi host with a few guests (operating system on your virtual machines), I find that using the web client is pretty straight-forward. However, integration with VMware Fusion Pro 11 is also possible — and albeit a little limited, it provides a great user experience.
I was able to move the virtual machines I had on my laptop to ESXi drag & dropping. I still need to migrate a Ubuntu image not listed there that I used to use a decade ago or so :)
FreeBSD is an open-source operating system liked for its robustness and security model. I want to learn more about it, so I’ll be trying to use it first instead of any other operating systems for deploying my projects — and given Netflix’s positive experience with it, I know it’s a great choice.
FreeBSD supports installation of packages and ports. Packages are compiled ports. Installing port for the first time in FreeBSD:
$ portsnap fetch extract
You might want to read Using ports for more details.
To use Tailscale with FreeBSD, you can do this:
$ cd /usr/ports/security/tailscale/ && make install clean && kg install tailscale
Once installed, you want to run it as a service:
$ service tailscaled enable
and start it with:
$ service tailscaled start
I’ll be using FreeNAS as if my external 8TB hard-drive was my network-attached storage appliance. It supports sharing your data using multiple protocols, including, but not limited to, Microsoft’s SMB, Apple’s deprecatedAFP (announcement), Sun’s NFS, rsync, and SSH.
There’s also the possibility of mounting network devices using iSCSI. You might want to read more about the difference between NAS and SAN. Still, when you set up SAN with iSCSI, it means you’ll be using a remote block device. When you set up a NAS, instead of controlling a storage device, you’ll be accessing the files remote filesystem.
Importing data: I’m having a hard time reading my encrypted LaCie Rugged USB-C 2 TB disk formatted with Apple File System (APFS).
rsync -auv /Volumes/media nas.henvic.dev:/mnt/henvic/media
to transfer my files to the NAS — using SSH as the transport layer, so no need to run the rsync service on FreeNAS.
I tried to tweak this my settings a bit without much success. I gained about 1MB/s by passing the flag:
-e 'ssh -T -c [email protected] -o Compression=no'
to rsync to tweak the SSH connection and the encryption cipher.
List the SSH ciphers available on your system by running ssh
-Q cipher. For the sake of security, I recommend against messing with this, though.
FreeNAS doesn’t recognize APFS, and I decided that using my Macbook to migrate the data was safer.
I’m leaving my MacBook turned on during nights to upload the data to the NAS. I avoid coffee, but my MacBook uses caffeine to avoid sleeping.
The transfer rate between my Macbook and the NAS is a little slower than it should, I think. Perhaps decrypting the data from disk or the SSH encryption is getting in the way?
iStat Menus showing how my transfer rate is ten times or so slower than it theoretically should be in an ideal world.
Day-to-day: I’m going to use SMB since APFS was deprecated (I only discovered this by chance).
FreeNAS also comes with a few useful services that you can enable and use, like MinIO — a cloud storage server that is API compatible with Amazon S3.
Other plugins include:
A few to automate backing up on services or other NAS.
Self-hosted git service using Gogs.
Emby and Plex media players.
Zone Minder is an opensource video surveilance (CCTV) software system.
Transmission, BitTorrent client.
Quassel IRC bouncer
FreeBSD Jails are used as the basis of these plugins.
Remote access: I plan to run TailScale on a Jail to access my files remotely when I’m not at home. I wish FreeNAS came with a plugin for it.
Clear Linux OS
Clear Linux is one of the best Linux distributions out there. It is created and maintained by Intel and has excellent hardware compatibility, and it’s the best in the benchmarks. It might as well be one of the best Linux distribution I have ever used in regards to attention to detail.
It is well-documented and follows a functional style for software installation, too, with the concept of bundles — making your life supposedly easier.
Clear Linux is a Linux distribution created by Intel.
I’ll be using it to run a Kubernetes cluster and get rid of Docker on my main MacBook Pro. Adieu, Docker.qcow2! 🐄
Installing Docker and Kubernetes:
$ sudo swupd bundle-add cloud-native-basic bundle-add cloud-control containers-basic
You’ll probably want to read a bit about Kata Containers and the cri-o runtimes.
Perhaps I’ll install TetriNET and Frozen Bubble on it too (on a second VM for the sake of isolation?).
OpenIndiana is a illumos distribution. Illumos is an opensource operating system based in OpenSolaris, which itself is based in Solaris.
Solaris is an interesting operating system with great contributions to the opensource ecosystem such as ZFS (which is also used by FreeBSD and FreeNAS).
Haiku is an opensource operating system compatible with the discontinued BeOS. BeOS could have been what NeXTSTEP became to Apple: a replacement for the Classic Mac OS.
Out of curiosity, I installed the psychedelic TempleOS. An operating system created by Terry A. Davis, who had schizophrenia. I had mostly no idea what I’d found. If you “take the tour” and choose to run the TempleOS Test Suite, this is what you see.
Warning: Risk of epileptic seizures! Run this video or the operating system at your own risk!
CPU, memory, and storage for each virtual machine
I’m still playing with fine tunning it, but for my use case, there is not much secret. I don’t have a reason to have all virtual machines up at once.
CPU usage: it shows 12 CPUs instead of 6 because of hyper-threading.
I tried to run Fuchsia on ESXi, but the system never booted. It seems to work fine with the older Intel NUC 6 and 7, though, so I suppose it is doable with a little more effort. I had more luck just running it with qemu instead.
Virtual machines and emulators
It’s important to remind that VMware ESXi is a hypervisor that you can use to run x86 and x86–64 virtual machines on 64-bit PC hardware. It’s not an emulator for different architectures, so it’s not possible to run AmigaOS or Classic Mac OS on it.
I got excited about running different things and tried to run MorphOS without realizing it is designed for PowerPC (PPC). I only discovered this after it never booted up ¯_(ツ)_/¯.
Accessing from the outside world
I give each of my virtual machine a hostname that I can use to access them internally. I use only a single level of subdomain to keep things tidy, and to avoid any implication regarding HTTP cookie management.
I decided to use Tailscale to expose each node individually. However, I can’t install it on the host (ESXi), but this is fine because if I ever need access to it, I can always use something like:
ssh -L 127.0.0.1:443:homelab.henvic.dev:443 gateway.henvic.dev
and access the admin web client as usual on my web browser, pointing it to https://localhost.
Virtual Private Network (VPN)
Despite being able to access it remotely through TailScale (which uses WireGuard behind the scenes), sometimes, I may want to access my home network directly. I might want to do this to bypass IP geolocation verification if I’m traveling or to rely on a secure termination point if I’m accessing the web through a suspicious access point and want to mitigate the risk of a man-in-the-middle attack.
OpenVPN is a great option to solve this. I installed its appliance image on ESXi, and it worked out of the box like a charm.
You can install OpenVPN Connect on your computer or smartphone for easy connection.
Now, all I need to use it from outside home is to expose it through the web. I don’t have a static IP address at home, so this would be something else to solve too. In theory, I could always use Tailscale there also (for VPN inception).
Protecting your system
I recommend you use SSH with public-key cryptography (with the ed25519 cipher) to access everything you can, and disable password authentication or use it as a second-factor.
If you plan on having multiple systems, at first it might sound like a good idea to share your private key between them to avoid the hassle of changing files between machines, etc. However, you might want to limit the surface attack by generating a new key with:
$ ssh-keygen -t ed25519 -f ~/.ssh/id_ed25519 -C <comment>
and sharing them between machines (at least the ones you don’t trust too much, or if you share with other people). Maybe you want to read how to set up Multi-Factor Authentication for SSH using the google-authenticator-libpam.
Importing data from the cloud
I want to use Perkeep to import data from the cloud. I’ve photos and videos in both Google Photos and iCloud that I need to safely store on premises and off-site because we never know when a cloud provider might go away or, in practice, hijack your data — even when unwilling.
Perkeep is a set of open source formats, protocols, and software for modeling, storing, searching, sharing, and syncronizing data. I’ll be using it along with gphotos-cdp to download my data from Google Photos for safekeeping.
Mac Os X For Intel Nuc Core I5
I work with software development, and for the last five years or so, I use most the Go programming language, a language known to have fast tests and build times.
However, sometimes a project might have an architecture that takes too long to test, or you might find differences between operating systems that are usually only discovered on a CI. So, perhaps running Buildkite on the Intel NUC would be a great idea. Another possibility is to write a small program that would run tests on different machines and output the results.
Backup & restore plan
One common mistake many people make is never testing their backups. I’m guilt of this myself.
Back to around 2010, I had just started using OS X and relied on FileVault to back up my data. However, it only backed up data when you logged out your machine, but I just never logged out. I was tired from working overnight on this project of my own and removed a directory with rm -rf . It was the directory where I kept all my projects, and I wasn’t using git + GitHub back then, but a local copy of Mercurial without any remotes. I freaked out, but then I remembered I had just renamed the directory minutes before.
Then a couple of years ago, I was unfortunate enough to have my backpack stolen from a beach house in California. My TimeMachine backup disk (cold) was in Brazil, and I discovered the hard way Backblaze backup didn’t restore permissions correctly. My operating system was so screwed up due to wrong permissions that I asked my parents to mail me my backup disk (and I’ve to admit they sent it without making a backup first), even though my data loss was minimal thanks to Backblaze.
An excellent backup & restore plan should account for things like this from happening, and consider things such as:
Cold backup storage on multiple sites (aware of distance and jurisdiction), and syncing plan.
Logical and physical security.
Recovery strategy (dry-run!) and data validation.
Processing photos and videos
Ideally, I’d love to offload processing photos and videos to my Intel NUC. I have a Canon 6D Mark II and a DJI Phantom Pro, and I enjoy taking pictures and sharing them. Still, I keep slacking in editing and publishing them because I used to keep them on an external drive, and, as silly as it is, I hate to have a USB drive connected to my laptop because I know I’ll disconnect the cable every dozen minutes or so. My computer is powerful, but my internal storage is minimal.
I use Adobe Lightroom Classic to manage my photo and video collections and to edit photos. Perhaps I’ll move to something like PhotoPrism for managing my collection as I’d prefer something that had a client/server architecture, and to use Adobe Photoshop for editing.
Processing offloading would be the best option. For photos, it would mean the server could be responsible for things like AI tagging or batch tasks such as creating previews. I wonder why Lightroom doesn’t have this. For videos, offloading is way more common. If I had a Mac mini instead of an Intel NUC, I could even run macOS as a guest operating system to help with this task a little, as the Adobe suite isn’t available for Linux.
ToR is a fundamental piece of the Internet ecosystem. It allows people to browse the Internet with privacy — essential to liberty and a way to avoid persecution from the state (especially important in conflict zones).
You can help the ToR project by running a Tor relay to relay traffic inside the network, or you can even set up an exit node so people can use your Internet connection as the “exit” point to the “mundane” Internet.
You can also host an onion service (formerly known as “hidden service”).
Using the Tor Browser to access Facebook, one of the few major websites that has an onion service — meaning no exit nodes as the connection is routed end-to-end through the Tor network.
One problem I’ve with SSH is that it’s easy to close my laptop lid and to lose a connection. Usually, this is not a problem, but eventually, I happen to be doing some heavy-lifting on a server that will take a while, and I get stuck with it. You can use tmux to avoid this, but why not EternalTerminal? I need to configure this in my primary virtual machines (FreeBSD and Linux).
Reviews from others
Newest Intel Nuc
I hope you enjoyed this blog post. If you have any tips for me, interesting stuff to share or just want to talk about this article, please reach out.
Intel Nuc Kits
If you click and buy any of these from Amazon after visiting the links above, I might get a commission from their Affiliate program.
I bought an Intel NUC 10th generation and installed the VMware ESXi hypervisor, FreeBSD, FreeNAS, Clear Linux, and more to serve as my homeserver, run containers, backup data, etc. :)
Sharing my experience here...https://t.co/gscoxPDuTa